|
|
|
|
|
Becker machine engineering company has been a global player in mobile machining for more than 20 years.
Our team consists of experienced specialists who regularly demonstrate to customers the excellent results we achieve with our machines. We carry out quality drilling, planing and milling work to your requirements - on site, reliably, promptly and at low cost.
Just try us!
|
|
|
|
|
|
|
|
· Fast performance of the job
· Short machine/plant stoppage times
· Accurate results
· Zero transport costs
· Zero dismantling / installation costs
|
|
|
|
|
|
|
|
We can step in even at short notice. That’s because we have several machines available, and require hardly any preparation work in our Molbergen facility for standard jobs.
Our fitters carry all the tools they need with them, so they are always ready to respond to new challenges. They are active throughout Germany, in Europe and even worldwide. If necessary, you can rely on our 24/7 service.
|
|
|
|
|
|
|
|
When work is carried out in facilities that require monitoring, e.g. nuclear power stations, there is a risk of exposure to radiation.
Companies active in this field must hold a permit in accordance with §15 StrahlenSchutzVerordnung (StrlSchV – Radiation Protection Law) – we hold this permit!
Our employees are regularly trained, examined and instructed in the special requirements of this kind of work.
|
|
|
|
|
|
|
|
With our mobile drills we can drill holes into solid material up to a diameter of approx. 150mm in one go. To do this, we use a new engineering technology, currently available in this form from only a few companies. For larger boreholes, we can replace the drill with a spindle tool to achieve any diameter required. This does not involve significant extra preparation time.
Advantages for processing:
· Fast, low-cost and simple
· Drilling in one go
· No rough drilling necessary
· Drilling depths up to 15 times the borehole diameter
· No chip removal necessary
|
|
|
|
|
|
|
|
The milling frame and mobile drill are fastened or if possible clamped to the component to be machined using special mounting devices. If necessary, we manufacture additional mountings geared to your requirements.
The extremely compact design of our machining systems means they can be used even where space is tight. We balance performance, construction size and speed of deployment so we almost always achieve low-cost machining for the perfect solution.
|
|
|
|
|
|
|
|
Our machines are designed to be used directly on the part to be machined. The modular system means they can be disassembled in just a few moves, which guarantees they can be set up quickly and easily on site. Once assembled, our milling machines are compact and fit into practically any space, no matter how tight.
Possible applications:
· Superfine boreholes in bearing blocks, standard bearing and sleeve bearing seats
· Facing, internal and external shaping of sealing surfaces and recesses
· Facing foundation plates
· Boring bearing bushing tracks
· Slot cutting
· Inserting new gauge rings
· Drilling out shaft tubes
· Round-milling of contact surfaces for ball bearing slewing gears
|
|
|
|
|
|
|
|
We repair cracks or holes in cast-iron parts using the tie-bar method. This way, we can replace perforated areas with plates, or seal cracks.
Advantages of our machining:
· Rapid assistance in case of machine failure
· Usually, no dismantling of damaged parts necessary
· Original dimensions frequently restored after the repair
· Repaired area usually more durable than the original
· No heat transfer, i.e. no distortion
|
|
|
|
|
|
|
|
Naturally, we can also use our mobile technology in our workshop in Molbergen.
We are also equipped for:
· Spindle work
· Milling
· Steel cutting and machining
· Welding
Our cooperation with a partner in steel construction/steel factory building means we can advise and support you in this area too.
Simply contact us and we can jointly develop a solution for you.
|
|
|
|
|
|
 
|
|
Home | Who we are | What we do | Reference projects | Contact | Disclaimer | Downloads |
|
|
|
|
|
